Wine Guardian Through-the-Wall Specifications download pdf (Page 18)

Installation

CAUTION

SHARP EDGES

RISK OF SERIOUS INJURY

Sharp edges are present inside the Wine Guardian system.

Pre-installation Test

Test the system before installing it to check for non-visible shipping damage.

To test the system:

√ Set the system on the floor or a sturdy level surface

√ Plug in the system

√ Press the on/off switch, control illuminates. This indicates the system has power.

√ √

√ The built in timer prevents short cycling and keeps the system from turning on

right away. The system comes on and runs as long as the temperature of the space is

above the thermostat set point. After several minutes, cold air comes out of the system

from the evaporator section side and hot air comes from the condenser section. Listen

for any unusual noise or vibration.

Air Flow Illustration

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

No comments

Wine Guardian Through-the-Wall Specifications Page 18