Wine Guardian Through-the-Wall Specifications download pdf (Page 38)

Regulating the Wine Cellar Temperature

To keep the entire wine cellar at the same temperature, set the thermostat to run the supply fan

continuously, and not just when there is a call for cooling. Set Fan switch to ON instead of

AUTO.

Changing the Air Flow Direction

The grilles furnished with Wine Guardian are single directional, but the wine cellar airflow can

be directed manually by setting the louvers behind the plastic panel to the desired direction. You

must first remove the 2 screws at the bottom of the plastic front panel to gain access to the

louvers.

Maintenance

WARNING

BEFORE PERFORMING MAINTENANCE ON THE SYSTEM, READ AND UNDERSTAND THE SAFETY

INFORMATION CONTAINED WITHIN THE SAFETY CHAPTER OF THE WINE GUARDIAN MANUAL.

DANGER

HIGH VOLTAGE - RISK OF SERIOUS INJURY OR DEATH

High voltages are present in the cabinets. Turn off all power. Use the Lockout/Tagout

procedure before removing end panels or cover.

CAUTION

SHARP EDGES

RISK OF SEROUS INJURY

SHARP EDGES ARE PRESENT ON THE FAN WHEELS, HOUSEING, INS AND COILS.

Maintenance on Wine Guardian system requires working with high voltage and sheet metal

with possible sharp edges. Only qualified personnel should perform maintenance. Some

tasks require knowledge of mechanical and electrical methods. Make sure you are familiar

with all hazards, general safety related procedures, and safety labels on the system

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 46 47

No comments

Wine Guardian Through-the-Wall Specifications Page 38